Blastrac 1-8DPF40

The Blastrac 1-8DPF40 blast-cleaning machine is perfect for small to medium-sized jobs. The 1-8DPF40 is a walk-behind machine that when connected to an appropriate Blastrac dust collector provides a virtually dust-free, and friendly environment.

• Closed circuit which is dust free, when connected to an appropriate Blastrac dust collector.
• Easy operating (walk behind).
• Can work very close to corners.
• Ergonomic design and user's friendly control panel.
• Reliable machine, suitable for rental.
• Easy to transport, handle and use.
• Can be used for floor preparation / renovation / maintenance and decorative purposes.

Application: The 1-8DPF40 is a lightweight and portable walk behind blast-cleaning machine. It can handle most small and medium-sized jobs on its own, this machine is perfectly suited for concrete restoration, industrial flooring preparation, renovation, maintenance and much more, to receive advice or training about shot blasting or to find the best products for your surface preparation applications, contact Blastrac.



RELATED PRODUCTS


Dustcollector: BDC-1330 / BDC-317 / BDC-317P / BDC-3140

Abrasive S330 / S390: 999-0330 / 999-0390
10m suction hose Ø76: 005014
Magnetic broom R600: 001238
Maintenance kit: E10018
Personal safety features:
On request / See manual

Technical Specifications


Working width: 203mm
Blasting capacity: Up to 70m²/h on concrete
Motor: 4,0kW / 400V - 50Hz or 60Hz / 16A - three phase – 5 pole
Weight: 122kg
Dimensions (L,W,H): 1100 mm / 370mm / 1030mm
Drive system / speed: Electric / 0.5 – 23 m/min
Push / Pull machine: Push
Abrasive consumption: 10 – 75 gr/m²
Surface:
Steel / Concrete / Stone / Asphalt

Blastrac 1-8DPS30

BLASTRAC MODEL 1-8DPS30 The Blastrac 1-8DPS30 shot blast-cleaning machine is perfect for small to medium-sized jobs.

1-8DPS30 is a heavy duty and reliable enough to be suitable for rental use. 1-8DPS30 is a walk-behind machine that when connected to an appropriate Blastrac dust collector provides a virtually dust-free, and friendly environment.

Application:

The 1-8DPS30 walk behind blast-cleaning machine is an ideal tool for any surface preparation application. Lightweight and portable, it can handle most small and medium-sized jobs on its own, this machine is perfectly suited for concrete restoration, industrial flooring preparation, renovation, maintenance and much more, to receive advice or training about shot blasting or to find the best products for your surface preparation applications, contact Blastrac. Technical Specifications • Closed circuit which is dust free, when connected to an appropriate Blastrac dust collector. • Universal unit: can be connected to a standard electrical plug (230V). • First model of the range with an electric drive system. • Ergonomic design and user's friendly control panel. • Heavy duty professional equipment available either in 230V (easy to plug on every jobsite) or 400V. • Reliable machine, suitable for rental. • Easy to transport, handle and use. • Can be used for floor preparation / renovation / maintenance and decorative purposes.

SPECIFICATIONS:

Blasting Width: 8 in. (203mm) Travel Speed: Up to 75 ft/min. (23m/min.) Prod. Capacity^†: Up to 600 sq.ft/hr on concrete (50 m2/hr) Blast Motor: 4 hp (3 kw) Amperage: 12.8A Voltage: 220V, 1ø, 60 Hz Power Cord: 29 ft. (8.8 m) Dust Hose Connection: 3 in. (76mm) Dimensions: L 51 in. (1310mm) x W 16 in. (400mm) x H 47 in.(1200mm) Weight: Net 275 lbs (125kg)

New improvements make the Blastrac 1-8DPS30 easier to operate and handle. This economical, self-propelled 8” shot blasting system now features drive controls on the steering handle. An EZ-adjust system for the control cage is another new feature that is operator friendly. Laser-cut components and utilization of improved manufacturing technologies along with a powder-coat finish helps assure quality construction and long life.

A vacuum hose retainer and slide-out shot screen/tray with an integrated EZ-grip handle are further enhancements, as well as an improved yoke attachment for the front steering arm and self-propelled motor. When attached to the BDC-3140P or other performance matched Blastrac dust collector, the 1-8DPS30 operates virtually dust-free.

The 1-8DPS30’s self-propelled operation improves productivity and promotes a more even and consistent blast pattern and surface profile. It consumes abrasive at less than 9 lb. per hr. and strips, cleans and profiles in one easy step to prepare concrete surfaces prior to application of coatings or overlays. Ideal for industrial floors, warehouses, commercial or residential garage floors, this shot blaster can prepare up to 450 to 600 sq. ft. per hour. The 1-8DPS30 is also perfect as a complementary unit for larger shot blasters.

^†Production rates achieved will be affected by variables specific to each job site. These figures are not guarantees of performance. For proper operation, the shot blasting unit must be used in conjunction with an appropriate dust collector.

FEATURES & BENEFITS:

• Drive controls on adjustable steering arm – finger-tip control to operate

• EZ-adjust system for fine-tuning the control cage

• Vacuum hose containment bracket facilitates hose management

• EZ-grip handle integrated into shot screen tray

• Dust port now designed into shot hopper lid

• Labor and time-saving shot blasting process strips, cleans and profiles in one step − cost effective and friendly to the environment

• Operates virtually dust-free when connected to BDC-3140P dust collector

• Great for decorative concrete applications when preparing for overlays and coatings

Drive controls now on steering arm

EZ-adjust system for control cage

EZ-grip slide out screen tray

Quick latch hose containment

Click pic to enlarge!

RETURN TO MAIN PAGE

BLASTRAC The innovators in surface preparation.

Shot blasting is the Professionals' preferred solution: • To clean and prepare surfaces before applying a coating / paint / resin and tiles. • To remove old coatings and rubber from roads and airport runways. • To remove markings from roads, highways, runways, industrial floors and more. • To regenerate grip and improve safety on roads and runways. BLASTRAC offers a large selection of equipment, ranging from the hand held model 1-5HH to the big 2-45D in either remotely controlled version or truck-mounted, plus 11 intermediate models, to cover all applications on any job site.Our target: to offer the best adapted equipment for the specific needs of any jobsite application with an output from 10 to 3000 m2 per hour on a concrete surface, all Blastrac blast-cleaning machines are dust free, when connected to an appropriate Blastrac dust collector.

(PLEASE CLICK ON INDIVIDUAL PHOTO FOR DETAIL SPECIFICATION OF EACH BLASTRAC SHOTBLASTER)

1-5HH Compact and powerful hand tool that can be used on both steel and concrete surface (Not ready)

Blastrac 1-8DPS30 shot blast-cleaning machine is perfect for small to medium-sized job.

The 1-8DPF40 is a walk-behind machine that is perfect for small to medium-sized jobs.

The Blastrac 1- 8DPS55 is a motorized drive blast-cleaning machine

The 1-10DPS75 blast-cleaning machine is a versatile complement for any surface preparation application

The 1-10DS Can be used for floor preparation / renovation / maintenance and decorative purposes.

1-15DS can be used for any suface such as Steel/ Concrete/ Stone and Asphalt

2-20DT Powerful machine equipped with 2 twin motors 11

KW